top of page
BMW 140I New Car Detail & CSL
Next on the list was this little 1 series from a previous client, After picking the car up from the dealership it was dropped straight with us to apply protection ready for a lifetime of road use. White is a little unforgiving unfortunately due to it's lack of depth however once the car had received a full decontamination and a single stage machine polish it was time for a coating of GTECHNIQ CSL along with C5 and G1 on all glass we were ready to go!
Site Title
Upon arrival - Looking a little flat!
Snow foam to remove any light surface contamination.
Then a full bodywork wash by hand before moving on to the clay bar to remove any stuck on contaminates.
Not to forget a thorough clean round all badges with soft bristle brushes.
A full wash down before application of fallout remover on all four wheels.
After fully drying the paintwork, it was on to correction a single stage was all that was needed on this fresh paint.
A full panel wipe down was given to remove and polish residue and allow for the coating to adhere.
Plenty of progress being made!
Following this it was time for protection, GTECHNIQ CSL had been chosen as a standalone along with C5 on all wheels.
After a full clean to all glass areas G1 was applied,
After a full panel wipedown C1 was used to seal all external areas, along with C5 on all wheels
Not to leave out the fiddly bits like exhaust tips, and of course the all important engine bay!
Final wipedown leaving one very sharp looking 1 series!
bottom of page