Porsche 911 GT3 Correction & C1
This was a task we took in our stride, this little gem got dropped off with us looking a little worse for wear with plenty of visible swirling to be seen after many road miles and potentially the odd track day! Among other tasks the owner wanted us to remove the badge giving the rear end a nice clean appearance and we believe this has paid off extremely well, all finished in Gtechniq C1 the car is back looking how it should insanely deep and fully sealed.
Upon arrival - Looking a little flat!
Snow foam to remove any light surface contamination.
Then a full bodywork wash by hand before moving on to the clay bar to remove any stuck on contaminates.
Not to forget a thorough clean round all badges with soft bristle brushes.
A full wash down before application of fallout remover on all four wheels.
After fully drying the paintwork, it was on to correction and boy what a challenge we had!
Plenty of progress being made!
We had also been tasked with removing the badge, leading to a far cleaner rear end.
After a full panel wipedown C1 was used to seal all external areas, along with C5 on all wheels
After all the polishing was completed it was time for a quick rinse, before a full panel wipe down to allow gtechniq C1 to be applied.
All glass areas then given a full deep clean, before applying Gtechniq G1 and of course C5 on all wheels.
After finishing off any fiddly bits it was time for C5 on all wheels before finishing up.